- 微機酸值測定儀的電極保養：非水電極的清洗與活化方法
- 選型避坑：智能自動酸值測定儀的加熱功率與萃取時間關系
- 絕緣油酸值測定儀助力絕緣油質量把控，降低設備故障
- 全自動絕緣油酸值測定儀準確度驗證：標準物質標定步驟
- 微機酸值測定儀操作教程：樣品制備、參數設置與結果解讀
- 油品酸值測定儀的日常校準與維護流程
- 為何微機酸值測定儀正逐步取代傳統手動滴定法？
- 微機酸值測定儀讓檢測時間縮短 50%
- 為什么要測潤滑劑酸值？潤滑劑酸值測定法告訴你答案
- 別等故障找上門：變壓器油酸值測試儀的預警功能
產品名稱：BD-PSZ130石油產品和潤滑劑酸值測定儀
產品型號：
產品報價：
產品特點：試樣溶解在含有少量水的甲苯異丙醇混合溶劑中，以氫氧化鉀異丙醇標準溶液為滴定劑進行電位滴定，所用的電極對為玻璃指示電極甘汞參比電極，在手繪或自動繪制的電位滴定劑量的曲線上僅把明顯突躍點作為終點，如果沒有明顯突躍點，則以相應的新配非水酸性或堿性緩沖溶液的電位值作為滴定終點。
BD-PSZ130石油產品和潤滑劑酸值測定儀的詳細資料：
BD-PSZ130石油產品和潤滑劑酸值測定儀
BD-PSZ130石油產品和潤滑劑酸值測定儀是依據國家標準GB/T 7304-2000《石油產品和潤滑劑酸值測定法》設計制造的，適用于測定能夠溶解于甲苯和異丙醇混合溶劑的石油產品和潤滑劑中的酸性組分。
概要：
試樣溶解在含有少量水的甲苯異丙醇混合溶劑中，以氫氧化鉀異丙醇標準溶液為滴定劑進行電位滴定，所用的電極對為玻璃指示電極甘汞參比電極，在手繪或自動繪制的電位滴定劑量的曲線上僅把明顯突躍點作為終點，如果沒有明顯突躍點，則以相應的新配非水酸性或堿性緩沖溶液的電位值作為滴定終點。
技術指標：
1.測量范圍：MV：0~±1999 PH：0~14.00
2.測量精度：MV：0.1%F.S PH：±0.01
3.控制精度：±0.03PH或±3mv
4.輸入抗阻：不小于1×1012Ω
使用意義和用途：
1.新的或使用后的油品酸性組分指的是添加劑或油品在使用過程中的降解產物如氧化產物等，這些物質可以通過用堿滴定而測得其相對含量，酸值就是在條件下測定這些物質在油品中的量，酸值可以用于控制潤滑油的質量，有時也可用于測定潤滑油在使用過程中的降解情況，但酸值作為潤滑油報廢指標必須通過經驗來確定
2.由于各種各樣的氧化產物都會影響酸值，同時有機物在腐蝕條件下變化也很大，所以此方法不能用于預測油品在使用過程中的腐蝕性能，例如酸值和油品對金屬的腐蝕程度之間沒有必然的。
Product Description: PSZ130petroleum products and lubricants - Determination of acid numberinstrument is designed and manufactured according to the national standard GB / T 7304-2000"petroleum products and lubricants - Determination of acid number - Law applicable to the determinationcan be dissolved in a mixture of toluene and isopropanolthe solvent petroleum productsand lubricants in the acidic components.
Summary:
The sample was dissolved in a mixed solvent of isopropyl alcohol in toluene containing a small amountofwater, isopropanol standard solution of potassium hydroxide as the titrant potentiometric titration,thepair of electrodes used in the indicator electrode is a glass calomel reference electrode, in thehand-painted or automatically potentiometric titration dose curve drawn only significant jump point as the end point, if no significant jump in the corresponding new with non-aqueous acidic or alkalinebuffer solutionpotential value as of the end of the titration.
Technical Specifications:
(1) Measuring range: MV: 0 to ± 1999 PH: 0 to 14.00
(2) measurement accuracy: MV: 0.1% FS PH: ± 0.01
3. The control accuracy: ± 0.03PH, or ± 3mv of
Input resistance: not less than 1 × 1012 ohm
Use the meaning and purpose:
1 after new or used oil acidic component refers to additives or oil degradation products such asoxidation products during use, these substances can be measured by titration with a base, obtaining the relative content, acid number is in determination of these substances in the quantity of oil, acid number can be used to control the quality of the lubricating oil is sometimes also be used for thedetermination of thedegradation of the lubricant during use under specified conditions, but the acid number as a lubricant oilof end-of-life indicators must experience determined
2 due to the various oxidation products will affect the acid value, while organics under corrosive conditions may also vary widely, so this method can not be used to predict the corrosion of the oilduring use, e.g. the acid and oil on is no necessary link between the degree of corrosion of metals.
| 如果你對BD-PSZ130石油產品和潤滑劑酸值測定儀感興趣，想了解更詳細的產品信息，填寫下表直接與廠家聯系： |
